Stainless Header Kit
Our Stainless Header kits are second to none .We pride ourselves on building what I feel is the nicest header on the market. They are available in 304 stainless standard and for severe duty applications we offer them in 321 stainless. We spend over 20 hours on each set just on fitment of the stainless pipes when we are ready to weld you cannot see light threw the joint this is one of the biggest factors to a nice header is the fitting of the pipes. When you cut a bend the material from the bend being stretched is thicker on one side than it is on another we use special tubing benders that reduce this. And then spend hours upon hours finger expanding sanding, and finessing the pipe so there are no mismatches in the joint. This drastically improves the part by not creating stress points where the pipe is off and the weld makes up for it. We then tig weld all the joints using a pulser and have the pipes purged with gas on the inside so the weld on the inside is as clean as it is on the outside. This is super important. You can tell when you look at our header just by the color of the weld it speaks for itself. We have proprietary gas lenses that we’ve developed over the years that provide the perfect coverage when welding. When you buy a Nelson header your buying quality that will last. We have kits available 67-69 camaros and 68 /72 novas in sbc/bbc/lsx 64-70’s chevelle sbc/bbc/lsx Gbodys grandnational/regals in sbc/lsx C2/3/4 Vettes in sbc and lsx if we don’t have you application we can make it for you.